18
206-4278
USB Configuration
The TV Manager / USB Download Menu
provides options that enable you to download configuration
or software files
individually to the TV. You can also use the Ez Download utility available from the
menu to select
one of each type of file to be downloaded at one time using one process
.
Each of the TV Manager / USB Download Menu functions requires that you have the appropriate
file(s) loaded on a USB memory device. If you wish to perform a software update or download a
splash screen image, the software/image file(s) must be stored in a folder named “LG_DTV” in the
root directory of the USB device. Clone/Configuration (.tlx) files should simply be stored in the root
directory of the USB device. The procedure below assumes that the desired file(s) is/are already
loaded onto the USB device. For further information on TV Manager / USB Download Menu functions
and file requirements, and/or for information on creating Clone or FTG Configuration (.tlx) files, refer
to the appropriate section(s) in this document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to assign the appropriate TV Zone #
in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with USB
Configuration. See “TV Configuration Options” on page 13 for further information.
• Ensure the USB device to be used has been formatted with FAT format.
•
When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to “Ez Download Utility” on pages 19 to 21 for further information on the Ez Download utility.
• Refer to “Custom Master TV Setup” on pages 32 to 34 for information on creating a Clone (.tlx)
file, and/or
refer to “Creating an FTG Configuration File” on pages 39 to 40 for information on
creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.
• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,” for
splash screen image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
USB Configuration via EZ-Manager Wizard
With either the TV Configuration Options or the Zone, Label, and
Room Number screen on display, proceed as follows to configure the
TV using the USB memory device.
1.
Insert the USB memory device with the appropriate file(s) into
the TV’s USB port.
2. Use the arrow keys on the Installer Remote to select
USB
Configuration
, and then press
OK
. You will be redirected to the
TV’s TV Manager / USB Download Menu (see example at right).
3. Select the appropriate option from the TV Manager / USB
Download Menu, and complete the download(s) as required.
Note:
If you perform a software update, the TV will complete the
update and then reboot. Upon restart, the TV will display the
EZ-Manager TV Configuration Options screen. If desired, you can
re-access the USB Download Menu (to perform additional functions),
proceed with configuration via the wizard, or exit the wizard.
4. Remove the USB memory device, and verify that the appropriate
configuration/update(s) is/are resident on the TV.
EZ-Manager Wizard (Cont.)
TV Manager
USB
Diagnostics
Previous
OK
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Note:
You can press on the
Installer Remote at any time to
return to the EZ-Manager Wizard.