LG 65LX570H Скачать руководство пользователя страница 35

Страница: 35 / 71

206-4278

Exporting a Clone File

This section describes how to export Master TV Setup configuration to a

USB memory device / Clone (.tlx) file.

Before You Begin

• Ensure the USB device has been formatted with FAT format.
• If the TV is NOT already in FTG Mode via CPU, complete the Custom

Master TV Setup procedure (see pages 32 to 34).

• If you would like the Target TV(s) to remain in Pass-through Mode after the

Clone file is imported, ensure the Master TV does not have an auto-tuned/

edited channel lineup; otherwise, importing the exported file will result in the

Target TV(s) being configured for FTG Mode via CPU.

• If you intend to use the TV Zoning feature, make sure to assign the

appropriate TV Zone # as described in Reference section, “Using the TV

Zoning Feature,” BEFORE performing the procedure below.

• It is not possible to clone a Master TV’s clock. Either set a Target TV’s

clock manually, or use the Auto Clock setting in the TV setup menus.

• Since the Export Clone File process retrieves the channel lineup from

the CPU, if the TV is currently in FTG Mode via EBL (FTG Channel Map

resides in EBL) it is not possible to export an FTG Channel Map.

Caution: Do not unplug the TV power cord or remove the USB

memory device while exporting is in progress, as doing so may

cause the TV to malfunction or harm the USB device, respectively.

Export Clone File Procedure

1. Ensure the Master TV is set up completely and turned ON.
2. Insert the USB memory device into the USB port on the Master TV.
3. Press

MENU SETTINGS

on the Installer Remote to display the TV

setup menus (TV is in Pass-through Mode) or the Function Menu (TV is

already in FTG Mode).

4. Use the arrow navigation keys to select/highlight either the

Option

icon from the TV setup menus or the

Lock

menu icon from the Function

Menu. Then, press the number “

” key a total of seven times to display the

TV Manager / USB Download Menu.

5. To gain access to the “Export Clone File” option in the TV Manager / USB

Download Menu, key in the following number sequence on the Installer

Remote:

Cloning Procedures

(Continued on next page)

Cloning typically refers to the process of using a Master TV Setup to configure a

Target TV. This section describes how to save (export) a Master TV Setup and then

transfer (import) it to a Target TV using a

USB memory device / Clone (.tlx) file.

You can also create

an FTG Configuration (.tlx) file using the FTG File Manager and

then use the Import Clone File procedure to transfer the configuration to Target TVs.

Refer to “Creating an FTG Configuration File” on pages 39 to 40, as necessary.

Export Clone File

►

Export Clone File... 25 %

Do not remove the USB from the port! Do not unplug!

xxLX570H-UA00001.tlx

TV Manager

USB

Diagnostics

Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File

Export Clone File

Note: TV Manager / Diagnostics

is for service use only.

Select the file name and press OK to start

xxLX570H-UA00001.TLX

Содержание 65LX570H








































































Результаты поиска

Содержание 65LX570H

Отзывы:

Похожие инструкции для 65LX570H

Бренды по названию

Популярные бренды

LG 65LX570H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 65LX570H

Отзывы:

Похожие инструкции для 65LX570H

Бренды по названию

Популярные бренды