60
206-4261
(Continued from previous page)
IP Configuration
a) In the Media Type field, use the Left/Right arrow keys to select
IP
.
Note:
If the Media Type has already been set in the Express Script Installer Menu Wizard,
the specified value will be reflected in this field.
Note:
Setting the Media Type to “IP” automatically sets the Data Channel field to “253.”
You cannot alter this setting (unless you revert Media Type to “RF”). Also, it is not possible
to direct enter “253” in the Data Channel field.
b) In the Server IP and Port Number fields, either key in or use the Left/Right arrow keys to
select the appropriate values for the Pro:Centric server IP address and port number. The
IP address must match the IPv4 multicast address and the port number must match the
port number that is set in the Pro:Centric server.
Note:
If the server IP address and port number have already been set in the Express Script
Installer Menu Wizard, the specified data will be reflected in these fields.
Pro:Centric Application Mode Configuration
In the Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric
Application Mode setting—
Off
,
FLASH,
or
GEM
. If the Pro:Centric Mode is set to “Off,”
Pro:Centric application data will not be downloaded.
Note:
If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or
in the Express Script Installer Menu Wizard, the specified mode will be reflected in this field.
If you change the mode in this menu, Installer Menu item 098 will now reflect the value you
selected here.
3. In the Update Event field, use the Left/Right arrow keys to select
On
or
Off
, as required.
Based
on the Update Time settings, the Wake For Update feature wakes the TV once daily to check
for, and if applicable, download updates from the Pro:Centric server. See Installer Menu item
121 UPDATE TIME HR description on page 30 for additional information on Wake For Update
functionality. If you set Update Event to “On,” specify the appropriate Wake For Update time in
the Update Time fields, as desired. Note that the Update time set in this menu is based on a
12-hour clock. Ensure the AM/PM specification is set accordingly.
4. Once all fields are completed as required, either select
Close
and then press
OK
on the Installer
Remote or press
to return to the IP Environment Menu.
IP Environment Setup (Cont.)
