LG 22LY560M Скачать руководство пользователя страница 43

Страница: 43 / 84

206-4261

Cloning Procedures (Cont.)

(Continued from previous page)

3. If the Master TV Setup contains a TV Zone # assignment, make sure

to assign the same Zone designation in the Target TV at this time.

See Reference section, “Using the TV Zoning Feature,” for further

information.

Note: In order for the proper location-specific TV Zone

profile data to be applied, the Zone designation must be

assigned in the Target TV(s) BEFORE Teaching is performed.

4. Insert the USB memory device with the TLX file into the Target TV’s USB

port.

5. Press

MENU

on the Installer Remote to display the TV setup menus.

Use the arrow navigation keys to select/highlight the

Option

menu icon,

and then press the number “

” key a total of seven times to display the

TV Manager / USB Download Menu.

6. With the TV Manager / USB Download Menu on display, use the Up/

Down arrow keys to select

Teach To TV

(TLX)

, and then press

7. In the Teach To TV (TLX) window, use the Up/Down arrow keys to

select the Master TV Setup you want to install.

Note:

Filenames for TLX files Learned from a TV are comprised of the TV

model and a five-digit number, for example, xxLY560M-UA00001.TLX.

8. Press

when you are ready to initiate the Teaching process.

Teaching status will be shown on a progress bar in a new window. Do

NOT remove the USB device until Teaching is complete. When the

Teaching process is complete, the TV will briefly display a “Teaching

Completed” window and then exit the TV Manager / USB Download

Menu.

9. Remove the USB memory device, and verify that the Master TV Setup

is now resident on the Target TV.

After the Teaching process is complete, the TV tunes according to the

setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a

Start Channel is specified, the TV will tune to that channel; otherwise, the

TV will return to the last channel tuned.

Updating TLX File... 50 %

Do not remove the USB from the port! Do not unplug!

xxLY560M-UA00001.tlx

Teach to TV (TLX)

xxLY560M-UA00001.TLX

No Channel Map

in TLX file!!

TV Manager

USB

Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software

Teach To TV (TLX)

Teach To TV (TLL)

Содержание 22LY560M





















































































Результаты поиска

Содержание 22LY560M

Отзывы:

Похожие инструкции для 22LY560M

Бренды по названию

Популярные бренды

LG 22LY560M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 22LY560M

Отзывы:

Похожие инструкции для 22LY560M

Бренды по названию

Популярные бренды