LG 22LY560M Скачать руководство пользователя страница 37

Страница: 37 / 84

206-4261

CHANNEL PREVIEW - BANK 1

CH 011-001 NORMAL-ADDED

Enter -> Change

CC -> VCHIP Menu, Ch. Preview -> Exit

Channel Banks Setup

Channel Banks Overview

Channel Banks enable institution administrators to create tiered channel programming on patient in-room

TVs. Each channel bank may offer a custom channel lineup for a pre-determined fee. LY560M TVs are

configured with four channel banks, i.e., Channel Banks 1, 2, 3, and 4. The top tier generally contains the

most programming (premium, etc.), 2nd tier = lesser programming, 3rd tier = basic programming, etc. It is

also possible to create an Inactive TV display with Channel Bank 4, so that an “Inactive TV Call Attendant”

message appears when the TV is turned ON. In this case, an administrator can then select another

channel bank on the patient’s in-room TV depending on the programming tier requested by the patient.
All channels found during Auto Tuning automatically will be “ADDED” to all four channel banks, and the

default is for all channels to be active (NORMAL) in Channel Banks 1, 2, 3, and 4.

Note: Channel banks are not supported on TVs that are configured for FTG Mode operation.

Before You Begin

•

Run the Express Script Installer Menu Wizard or complete the Custom Master TV Setup procedure (see

pages 12 to 17 or pages 31 to 35, respectively).

Note:

Channel banks can be defined as part of the Express Script Installer Menu Wizard, if desired.

However, if you are setting up channel banks after completing the Express Script or if you are creating a

customized Master TV Setup, use the Channel Preview/Banks Setup Menu as described below.

•

Installer Menu item 028 CH. OVERIDE must be set to 1 to allow access for channel banks setup.

Accessing the Channel Preview/Banks Setup Menu

1. To select a channel bank, press

CH. BANK

on the Installer Remote. The first time you press the CH.

BANK key, the TV display will show the currently active channel bank. Press

CH. BANK

repeatedly until

the desired channel bank is selected.

2. After the desired channel bank is selected, press

CH. PREVIEW

on the Installer Remote to display the

Channel Preview/Banks Setup Menu (see below).

Typical Channel

Preview/Banks Setup

Note: In the Installer Menu, all available Aux inputs are enabled by default. The Aux inputs

will appear between the highest analog and lowest digital channel number in the PTC

Channel Map when Channel Up/Down is used on the Installer Remote. If an Aux input will

not be used, it is advisable to disable it. If using the Express Script, customize the Aux

inputs as appropriate in the Aux Input screen (step 2). If performing the Custom Master TV

Setup procedure, ensure Installer Menu items 035, 039, 087, and 091 are set as required

before performing the 2-5-5 + MENU operation (step 5). After the TV setup is transferred to

the PTC, the only way to remove Aux inputs from the channel lineup, is to go to the

Channel Preview/Banks Setup Menu and select Normal-Deleted.

Содержание 22LY560M





















































































Результаты поиска

Содержание 22LY560M

Отзывы:

Похожие инструкции для 22LY560M

Бренды по названию

Популярные бренды

LG 22LY560M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 22LY560M

Отзывы:

Похожие инструкции для 22LY560M

Бренды по названию

Популярные бренды