LG 22LY560M Скачать руководство пользователя страница 45

Страница: 45 / 84

206-4261

Cloning Procedures (Cont.)

Teach Master TV Setup to Target TV
Note:

You may also use the Ez Download utility to complete the Teaching

process, if desired. See “Ez Download Utility” on pages 18 to 20 for further

information.
1. Turn ON the Target TV.

The next step depends on whether the Express Script Installer Menu

Wizard appears on the screen:
• If the wizard is displayed, the TV is in the required factory default

state. Exit the wizard, and then, go to step 3.

• Otherwise, ensure the Target TV is in Pass-through Mode, and then

continue with step 2.

2. Use the Installer Remote to access the Target TV Installer Menu (see

“Accessing the Installer Menu” on page 21 for further information). Set

Installer Menu item

117 FACT DEFAULT

, and press

. When the

value changes back to 0, press

again to exit the Installer Menu.

This step restores factory default settings on the TV.

3. Tune/set the TV to an analog or digital channel or Aux input (ideally the

same source tuned for 2-5-5 + MENU Mode during the Custom Master

TV Setup procedure, if applicable).

4. Insert the USB memory device with the TLL file into the Target TV’s USB

port.

5. Press

MENU

on the Installer Remote to display the TV setup menus, use

the arrow navigation keys to select/highlight the

Option

menu icon, and

then press the number “

” key a total of seven times to display the TV

Manager / USB Download Menu.

6. With the TV Manager / USB Download Menu on display, use the Up/

Down arrow keys to select

Teach To TV (TLL)

, and then press

7. In the Teach To TV (TLL) window, use the Up/Down arrow keys to

select the Master TV Setup you want to install.

Note:

Filenames for TLL files Learned from a TV are comprised of the TV

model and a five-digit number, for example, xxLY560M-UA00003.TLL.

8. Press

when you are ready to initiate the Teaching process.

Teaching status will be shown on a progress bar in a new window. Do

NOT remove the USB device until Teaching is complete. When the

Teaching process is complete, the TV will briefly display a “Teaching

Completed” window and then exit the TV Manager / USB Download

Menu.

9. Remove the USB device, and verify that the Master TV Setup is now

resident on the Target TV.

After the Teaching process is complete, the TV tunes according to the

setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a

Start Channel is specified, the TV will tune to that channel; otherwise, the

TV will return to the last channel tuned.

Updating TLL File... 50 %

Do not remove the USB from the port! Do not unplug!

xxLY560M-UA00003.tll

TV Manager

USB

Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)

Teach To TV (TLL)

xxLY560M-UA00003.TLL

Содержание 22LY560M





















































































Результаты поиска

Содержание 22LY560M

Отзывы:

Похожие инструкции для 22LY560M

Бренды по названию

Популярные бренды

LG 22LY560M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 22LY560M

Отзывы:

Похожие инструкции для 22LY560M

Бренды по названию

Популярные бренды