23
206-4261
Item
Function
Value Range
Default Value
Brief Description of Function
000
INSTALLER SEQ
0 ~ 3
0
Leave default set to 0.
001
POWER MANAGE
0 ~ 7
0
Sets number of hours of no activity before automatic shutoff.
002
AC ON
0 / 1
0
Set to 1 to enable TV to turn ON when AC power is applied.
003
BAND/AFC
0 ~ 3
1
Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
004
STRT CHANNEL
0 ~ 127, 255
255
Channel tuned when TV is turned ON. (Set to 255 to tune to channel tuned
before TV turned OFF.)
005
CHAN LOCK
0 / 1
0
If set to 1, cannot tune from current channel.
007
STRT VOLUME
0 ~ 63, 255
255
Volume level when TV is turned ON. (Set to 255 to use volume level before
TV turned OFF.)
008
MIN VOLUME
0 ~ 63
0
Sets minimum allowable volume setting.
009
MAX VOLUME
0 ~ 63
63
Sets maximum allowable volume setting.
010
MUTE DISABLE
0 / 1
0
Set to 1 to disable Mute Function.
011
KEY DEFEAT
0 / 1
1
If set to 1, joystick button menu navigation functions on display panel are not
available.
012
IR BANKS EN.
0 / 1
0
Set to 1 to enable TV to respond to bank discrete IR codes.
013
SCAN MODE
0 / 1
1
Set to 1 to allow Channel Up/Down to turn ON TV. (See detailed descriptions.)
014
STRT CH IN SM
0 / 1
0
Set to 1 to use the Start Channel for the Channel Map pivot point in Scan Mode.
015
SLEEP TIMER
0 / 1
1
Set to 1 to enable Sleep Timer.
016
EN TIMER
0 / 1
1
Set to 1 to enable On/Off Timers.
017
ALARM
0 / 1
1
Set to 1 to enable Alarm.
020
FEATURE LEVEL
0 ~ 1, 16 ~ 24,
64 ~ 65
1
Determines an additional IR code scheme to which the TV will respond.
021
V-CHIP
0 / 1
1
Set to 1 to enable V-Chip (Parental Control) functions.
022
MAX BLK HRS
0 ~ 99
12
Sets number of V-Chip blocking hours.
023
CAPTION LOCK
0 / 1
0
Set to 1 to retain caption setting before TV turned Off.
025
FUNCTION PRE.
0 ~ 1
1
Set to 1 to allow Channel Preview/Banks Setup Menu access via CH
PREVIEW key on Installer Remote.
027
HOSPITAL MODE
0 ~ 162, 254
254
Set according to the speaker selection, the pillow speaker code/supply voltage,
and the hospital IR code. See detailed instructions.
028
CH. OVERIDE
0 / 1
1
If set to 0, user access to channel settings in the TV setup menus is restricted
and users can only tune to channels that are included in the channel lineup.
029
OLD OCV
0 / 1
0
Set to 1 to remap the PTC’s direct tune channels for Aux inputs from 13x to 9x.
030
ACK MASK
0 / 1
0
If set to 1, enables ACK feature of MPI.
031
POLL RATE
20 ~ 169
94
Selects poll rate for MPI.
032
TIMING PULSE
186 ~ 227
207
Sets baud rate for MPI.
035
HDMI1 ENABLE
0 ~ 2
1
Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 1.
039
REAR AUX EN
0 / 1
1
Set to 1 to enable display panel Video 1 input jack.
041
SIMPLINK EN
0 ~ 3
0
Determines the status of the SIMPLINK feature. (See detailed descriptions.)
042
AUTO INPUTS
0 ~ 255
0
Determines the Aux inputs for which auto-sensing is enabled. (See detailed
descriptions.)
046
STRT AUX SRCE
1, 3 ~ 5, 255
255
Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
047
AUX STATUS
0 / 1
0
Set to 1 for MPI Aux source to be reported as a channel number instead of
Channel 0.
Installer Menu Items 000 through 047
Installer Menu (Cont.)
