LG Innotek RNRZ-B510A, Руководство пользователя

Страница: 43 / 50

Operation 43
3
Oper
ation
Alarm Host
Alarm host is added to expand the alarm input and output ports of
device on the basis of local alarm input and output ports of device. If
the network alarm host and serial port alarm host are added at the
same time, the port number of network alarm host is less than that of
serial port alarm host.
Network Alarm Host
1. Select [Main Menu] > [Alarm Setting] > [Alarm Host] > [Network
Alarm Host] to enter the network alarm host setting screen as
shown in the figure below.
2. Select [Alarm Server] option for the network alarm.
3. Check [Enable] to enable the network alarm host.
4. Set the IP address of network alarm host.
5. Set the communication port of network alarm host.
6. Set the number of alarm input ports of network alarm host.
7. Set the number of alarm output ports of network alarm host.
Serial
1. Select [Main Menu] > [Alarm Setting] > [Alarm Host] > [Serial]
to enter the serial port alarm host setting screen as shown in the
figure below.
2. Select [Alarm Server] option for the serial port alarm.
3. Check [Enable] to enable the serial port alarm host.
4. Set the communication port number for the serial port alarm host.
5. Set the address of serial port alarm host.
6. Set the number of alarm input ports of serial port alarm host.
7. Set the number of alarm outnput ports of serial port alarm host.
Manual Alarm
1. Select [Main Menu] > [Alarm Setting] > [Manual Alarm] to enter
the manual alarm setting screen as shown in the figure below.
2. Select an alarm output port and click [Activate] or [Clear] to
activate or clear the control. The current status of this port is
displayed in the status bar of alarm output port.
Click [Activate All] or [Clear All] to activate or clear the control for
all alarm output ports in the list
Click [Refresh] to get the current attribute and status of alarm
output port.
Clear Alarm
1. Select [Main Menu] > [Alarm Setting] > [Clear Alarm] to enter
the alarm clearing setting screen as shown in the figure below.
2. In the manual alarm clearing screen, click [Clear] of each option to
eliminate correspoding type of alarm.