LG Innotek RNRZ-B510A, Руководство пользователя

Страница: 38 / 50

38 Operation
3
Oper
ation
NFS setting
1. Select [Main Menu] > [System Setting] > [Disk Management]
> [NFS Setup] to enter the NFS setting screen as shown in the
figure below.
2. Set the IP address (domain name) and directory of “NFS” service.
3. Click [Apply] to save the setting.
S.M.A.R.T.
1. Select [Main Menu] > [System Setting] > [Disk Management] >
[S.M.A.R.T] to enter the SMART setting screen as shown in the
figure below.
2. Select the disk to be detected, check [Start S.M.A.R.T. Detection]
and enable the S.M.A.R.T. detection function of this disk. S.M.A.R.T.
detection information is displayed in the corresponding interface.
3. When [Do not use this hard disk if self-evaluation is not passed]
is selected, do not use this hard disk if there is a problem in self-
evaluation after the S.M.A.R.T. detection of hard disk.
Hot-spare Setting
Enable the hot-spare system when a failure happens on a device in the
hot-spare system, the system will automatically switches to the hot-
spare machine to work so as to ensure the continuity of video.
A hot-spare system consists of several working machines and hot-
spare machines and a working machine can set at most 16 hot-spare
machines. When the hot-spare machine detects that the working
machine is offline, the hot-spare machine will actively connect to the
IP device connected with working machine and start the video; when
the hot-spare machine detects that the working machine is online, it
will actively disconnect the connection with IP device and upload the
video backed up previously to the working machine.
Working machine setting
1. Select [Main Menu] > [System Setting] > [Hot-spare Setting] to
enter the Hot-spare setting screen as shown in the figure below.
2. Set the [Operation Mode] option to [Normal Mode].
Hot-spare machine setting
1. Select [Main Menu] > [System Setting] > [Hot-spare Setting] to
enter the Hot-spare setting screen.
2. Set the [Operation Mode] option to [Hot-spare Mode].
3. Click [Apply] to enter hot-spare mode after rebooting.
4. After the rebooting, only the necessary configuration functions
are reserved by the hot-spare machine.