22
Operation
3
Oper
ation
Video mask
The video mask function can cover some key areas on the video.
1. Select a channel which needs video mask setting.
2. Drag the mouse to set the video mask area.
PTZ privacy mask
1. Select a channel which needs PTZ privacy mask setting.
2. Control the PTZ through the shortcut PTZ control panel and
switch to the screen you want to cover.
3. Drag the mouse to set the video mask area and click [Add Area].
4. The added areas are displayed in the list on the right and they can
be deleted by clicking [Delete Region].
NOTE
An IP device which supports this function is needed for the function.
Motion
1. Select [Main Menu] > [Cameras] > [Motion] to enter the motion
detection setup screen as shown in the figure below.
2. Select a channel which needs motion detection setting.
3. Adjust the sensitivity by using the sensitivity slider. The higher the
sensitivity value, the more sensitive the motion detect.
4. Check [Enable] to enable the motion detection.
5. Click [Schedule] to set the alarm time.
6. Drag the mouse on the camera view screen to set the region to be
detected.
7. Set options on the [Activate] box. When the system detects
motion, it can activate audio, screen display, email, recording,
output, snapshot, word plan and single-screen.
8. After the setting is completed, the motion detection settings can
be copied to other channels.
9. Click [Apply] to save the setting.
Mask Alarm
1. Select [Main Menu] > [Cameras] > [Mask Alarm] to enter the
mask alarm setup screen as shown in the figure below.
2. Select a channel which needs video mask setting.
3. Check [Enable] to enable the mask alarm.
4. Click [Schedule] to set the alarm time.
5. Set options on the [Activate] box. When an alarm occurs, it can
activate audio, screen display, email, recording, output, snapshot,
word plan and single-screen.
6. After the setting is completed, the mask alarm settings can be
copied to other channels.
7. Click [Apply] to save the setting.
Содержание RNRZ-B510A
Страница 50: ......
