LG Innotek RNRZ-B510A, Руководство пользователя

Страница: 23 / 50

Operation 23
3
Oper
ation
Alarm Input
By setting the alarm input, the system can be linked for prompting and
recording when the alarm input alarm situation occurs in the front-
terminal IPC.
1. Select [Main Menu] > [Cameras] > [Alarm Input] to enter the
alarm input setup screen as shown in the figure below.
2. Select an input port No. to be set.
3. Select an alarm type.
NOTE
• [N/O Alarm] can be selected when the alarm input port of the
device is nomally open.
• [N/C Alarm] can be selected when the alarm input port of the
device is nomally closed.
4. Check [Enable] to enable the alarm input.
5. Click [Schedule] to set the alarm time.
6. Set options on the [Activate] box. When an alarm occurs, it can
activate audio, screen display, email, recording, output, snapshot,
PTZ, word plan and single-screen.
7. After the setting is completed, the mask alarm settings can be
copied to other ports.
8. Click [Apply] to save the setting.
Video Loss
Set the video loss alarm and link the system for prompting and
recording when the video loss occurs in the channel.
1. Select [Main Menu] > [Cameras] > [Video Loss] to enter the video
loss setting screen as shown in the figure below.
2. Select a channel which needs video loss setting.
3. Check [Enable] and click [Schedule] to set the alarming time of
video loss.
4. Set options on the [Activate] box. When there is a video loss,
it can activate audio, screen display, email, recording, output,
snapshot, PTZ and single-screen.
5. After the setting is completed, it can be copied to other channels.
6. Click [Apply] to save the setting.
PTZ Setup
Set the control protocol, serial port attribute, etc. for the PTZ channel.
1. Select [Main Menu] > [Cameras] > [PTZ Setup] to enter the PTZ
setup screen as shown in the figure below.
2. Select a channel which needs PTZ setup.
3. Select PTZ control protocol, address and serial port of the channel.
4. After the setting is completed, it can be copied to other channels.
5. Click [Apply] to save the setting.
NOTE
Users can customize the attribute of serial port, set the bit rate, data
bit, stop bit and check bit of serial port and select to copy settings to
other channels after setting.