Wireless SOHO
Installation and Operation Manual
54
3.
Select “OFF”.
4.
Press the
[Save]
soft button.
To use FAX machine/modem,
LWS-BS station
1.
Press the
[Menu]
button.
2.
Dial 3 4 7. “Modem” menu.
3.
Select “ON”.
4.
Press the
[Save]
soft button.
Conditions
1. The Forward feature is not available for SLT/Fax port.
2. Calls to SLT/Fax port cannot be picked up.
3. The Camp-on feature is not allowed to a busy SLT/Fax port.
4. Voice messaging is not available for the SLT/Fax port.
Programming
S
UPPLEMENTARY
Modem
–
[Menu]
+ 3 4 7
3.24.2 SLT Hot Line
The SLT/Fax port is assigned to the last station number (ex: 708 in 700-708, 18 in 10-18, and 108 in 100-108).
This port is intended for use by an SLT, FAX, or modem. The port can be configured to automatically access a
CO Line when the connected device goes off-hook. The Hot Line can be configured as:
Off
– No Hot Line operation
Idle Line
– select an idle when the SLT port goes off-hook
Line 1
– select Line 1 when the SLT port goes off-hook
Line 2
– select Line 2 when the SLT port goes off-hook
Line 3
– select Line 3 when the SLT port goes off-hook
In addition, the action the system will take when a hook-flash is detected from the device connected to the port
can be configured as
Flash Xfer: hook-flash, dial tone received then transfer as usual.
Flash Drop: hook-flash, then previous call is dropped.
Flash Ignore: hook-flash, nothing happens.
Hold Release: hook-flash, Held Line is released when the SLT goes On-Hook.
Operation
To select the SLT Hot Line function from the LWS-BS,
1.
Press the
[Menu]
button.
2.
Dial 3 4 8.
3.
Select the desired Hot Line (Off, Idle Line, Line 1, Line 2, or Line 3).
4.
Press the
[Save]
soft button.
To select hook flash function from the LWS-BS,
1.
Press the
[Menu]
button.
2.
Dial 3 4 6.
3.
Select the desired opt
ion for hook flash.(“FLASH XFER”, “FLASH DROP”, “FLASH IGNORE”,
“HOLD RELEASE”)
