Wireless SOHO
Installation and Operation Manual
32
Conditions
1. The transferring station may camp a call to at a busy station (refer to Camp-On).
2. A station in DND, out of range or out-of-service cannot receive a transfer; any attempt will result in
an error tone.
3. If an external call is transferred to external destination (Line to line call), the call duration will be
limited to the “Line to Line call timer”(Menu 3 4 9).
4. Calls transferred Off-Net are subject to restriction (
Menu
1 5 1). The exception is calls transferred
to speed dial numbers (200~399).
Programming
C
ONFIGURATION
Offnet forward/transfer
–
[Menu]
+ 1 5 3
S
UPPLEMENTARY
Line to Line call timer
–
[Menu]
+ 3 4 9
3.4 Call Waiting/Camp-On
Description
Call Waiting is used to notify a busy station that a call is waiting. The busy station is notified of the waiting
call with a Camp-On tone.
After receiving a busy signal, the calling station camps on to the called station. The called station can
respond by:
answering the waiting call, which places the active call on hold,
activating One-Time DND, or
ignoring the Camp-On tone.
Operation
To activate a Camp-On while receiving the Intercom busy tone:
1.
Press the „*‟ button, called and calling stations receive Camp-On tone.
Conditions
1. The user may only Camp-On to a station in busy mode; a user may not Camp-On to a station in
DND, a conference, etc.
2. If the calling station disconnects from the call after activating Camp-On, Camp-On is cancelled.
3. A Camp-
On tone is sent each time the calling user presses the „*‟ button.
3.5 LINE Access
Description
Stations can access outgoing lines. The LWS-BS station and LWS-WK may use flexible buttons assigned
to access a specific line button for outgoing calls. Line signal type (DTMF/PULSE) can be selected in
[Menu]
1 3 3.
