Lexmark XC2132, Руководство по обслуживанию

Страница: 86 / 430

Message Action
Standard USB port disabled [56]
From the printer control panel, select Continue to clear the
message. For non
‑
touch
‑
screen printer models, press OK to
confirm.
Notes:
•
The printer discards any data received through the USB
port.
• Make sure the USB Buffer menu is not set to Disabled.
Supply needed to complete job
Try one or more of the following:
•
From the printer control panel, touch Prompt for supplies
to view all error messages that indicate what supplies are
needed to continue processing the current job. For
non
‑
touch
‑
screen printer models, press OK to clear the
message and continue printing.
1
Order the missing supply immediately.
2
Install the supply. For more information, see the
instruction sheet that came with the supply.
•
Cancel the print job, then install the missing supply, and
then resent the print job.
Too many flash options installed [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
4
Connect the power cord to properly grounded electrical
outlet.
5
Turn the printer back on.
Too many trays attached [58
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
4
Connect the power cord to a properly grounded electrical
outlet.
5
Turn the printer back on.
[Type] imaging kit low [84.xy]
Note: The type can be a black imaging kit, or a black and
color imaging kit.
You may need to replace the imaging kit. If necessary, touch
Continue on the printer control panel to clear the message
and continue printing.
[Type] imaging kit nearly low [84.xy]
Note: The type can be a black imaging kit, or a black and
color imaging kit.
If necessary, touch Continue on the printer control panel to
clear the message and continue printing.
7527
Diagnostic information
86