Lexmark X7675, Руководство пользователя

Страница: 34 / 181

There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the printer.
Note: Do not remove the plug. If you remove it, other telecommunications devices in your home (such as telephones
or answering machines) may not work.
Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If
problems occur, see “Setup troubleshooting” on page 130.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is
required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and
receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set up the
printer.
Equipment Benefits See this section
•
The printer
•
A telephone cord
Send and receive faxes without using a
computer. “Connecting directly to a telephone
wall jack” on page 37
•
The printer
•
A telephone
•
Two telephone cords
•
Use the fax line as a normal telephone
line.
•
Send and receive faxes without using a
computer.
“Connecting to a telephone” on
page 40
•
The printer
•
A telephone
•
An answering machine
•
Three telephone cords
Receive both incoming voice messages and
faxes. “Connecting to an answering
machine” on page 35
Setting up the printer
34