Lexmark X7675, Руководство пользователя

Страница: 141 / 181

Printer receives a blank fax
These are possible causes and solutions. Try one or more of the following:
C
HECK ORIGINAL DOCUMENT
Ask the sender to verify the original document was loaded correctly.
C
HECK INK
Check the ink levels, and install a new print cartridge if necessary.
C
HECK CARTRIDGES
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
1 2
3
Reinsert the print cartridges.
Received fax has poor print quality
These are possible solutions. Try one or more of the following:
R
EVIEW CHECKLIST FOR SENDER
•
Check that the quality of the original document is satisfactory.
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Increase the fax scan resolution.
C
HECK INK
Check the ink levels, and install a new print cartridge if necessary.
D
ECREASE THE TRANSMISSION SPEED
1
From the printer control panel, press .
2
Press the up or down arrow button until
Fax Setup
is highlighted, and then press OK .
3
Press the up or down arrow button until
Dialing and Sending
is highlighted, and then press OK .
4
Press the up or down arrow button until
Max Send Speed
is highlighted, and then press OK .
5
Press the up or down arrow button to select a lower transmission speed, and then press OK .
6
Press .
Troubleshooting
141