Lexmark X500N, Руководство по обслуживанию

Страница: 47 / 244

Diagnostic information
2-9
7100-XXX
Toner Error
install Supported Cartridge
An invalid toner cartridge
is installed. install a supported cartridge. If the problem
persists, see
“Missing toner cartridge service
check” on page 2-32 .
Missing
install Toner (C,M,Y,K)
A toner cartridge is not
keyed properly. install proper brand of toner cartridge. If problem
persists, see
“Missing toner cartridge service
check” on page 2-32 .
Missing
install OPC Belt
The OPC belt cartridge is
not installed. Correctly install the photodeveloper cartridge to
clear message and continue printing. If error
persists, see
“Missing photodeveloper
cartridge service check” on page 2-33 .
Missing
install Transfer Roller
The transfer roller is not
installed. Ensure transfer roller is properly installed. If
problem persists, see
“Transfer roller missing
service check” on page 2-34 .
Paper Jam A 1-2 Paper is jamming at
feeding area. See “Paper Jam A1, rear (tray 1)” on page 3-24
or “Paper Jam A2, rear (tray 2)” on page 3-26
for instructions to clear the jam.
Paper Jam B Paper is jamming inside
the MFP. See “Paper Jam B rear” on page 3-27 for
instructions to clear the jam.
Paper Jam C Paper is jamming at paper
exit area. See “Paper Jam C rear” on page 3-29 for
instructions to clear the jam.
Cover Open
Close (Front, Rear, OPC)
The back, front, or OPC
cover is open. Close specified cover if open. If not open, open
the cover and close. If the problem persists, see
“Cover open service check” on page 2-35 .
TR Belt Life
Replace Transfer Belt
The transfer belt is at its
end of life. Replace the transfer belt. See “Transfer belt
unit removal” on page 4-5 .
TR Kit Life
Replace PQ Kit
The transfer roll and
transfer belt cleaning roll
have reached the end of
life. Replace the transfer roll. See “Transfer roller
removal” on page 4-6 . Also, replace the transfer
belt cleaning roller. See “Transfer belt cleaning
roller removal” on page 4-4 .
PF1 Kit Life
Replace PF Kit 1
The paperfeed roll and
separator pad in tray 1 are
at the end of life. Replace the paperfeed roll and the separator pad
for the respective paper tray (1 or 2). See
“Paper
feed roller removal” on page 4-32 .
PF2 Kit Life
Replace PF Kit 2
The paperfeed roll and
separator pad in tray 2 are
at the end of life.
ADF Jam
Open ADF cover and Clear Jam
A sheet of paper is
jammed in the ADF. Clear the ADF jam. If the message persists, see
“ADF streak service check” on page 2-41 .
ADF Cover Open
Close ADF cover
The ADF cover is open. Close the ADF cover. If the cover is already
closed, see
“ADF streak service check” on
page 2-41 .
Scan Calibration Error Scanner is out of
calibration. Perform scanner calibration.
Scan Lock Error
Unlock Scanner
The scanner lock is in the
locked position. Unlock the scanner. If the scanner lock is in the
unlocked position, see
“Flatbed service check”
on page 2-41 .
Message Description Action