Lexmark T620 Скачать руководство пользователя страница 122

Страница: 122 / 221

122

Resetting
Active Bin

What this message means:

The printer is resetting to the active bin in a linked set of bins.

What you can do:

Wait for the message to clear.

Resetting the
Printer

What this message means:

The printer is resetting to the current default settings. Any active print jobs are canceled.

What you can do:

Wait for the message to clear.

Resetting
Maint Cnt Value

What this message means:

The printer is resetting the counter that tracks wear on the fuser.

What you can do:

Wait for the message to clear.

Restore Held
Jobs. Go/Stop?

What this message means:

The printer detects Print and Hold jobs stored on the hard disk during a power-on cycle or a
printer reset.

What you can do:

•

Press

. All Print and Hold jobs on the hard disk are restored to printer memory.

•

Press

Return

Stop

. No Print and Hold jobs are restored to printer memory. The printer

returns to the Ready state.

Содержание T620






























































































































































































































Результаты поиска

Содержание T620

Отзывы:

Бренды по названию

Популярные бренды

Lexmark T620, Руководство пользователя

Результаты поиска

Содержание T620

Отзывы:

Бренды по названию

Популярные бренды