Lexmark T620 Скачать руководство пользователя страница 117

Страница: 117 / 221

117

What you can do:

•

Send a job to print.

•

Press

to quickly warm the printer to normal operating temperature and display the

Ready

message.

Note: This message does not appear on the T620 printer.

See also:

Power Saver

(Setup Menu)

Priming Failed.
Retry?

What this message means:

The printer failed to prepare the stapler to staple print jobs.

What you can do:

•

Press

to try priming the stapler again.

•

Make sure staples are loaded and there is no jam in the stapler.

•

Make sure paper is loaded in the tray specified in the Staple Prime Source menu item.

•

Press

Return

Stop

to cancel priming.

Priming Stapler

What this message means:

The printer is preparing the stapler to staple print jobs. The printer tests the stapler several
times before returning to the Ready state.

What you can do:

Wait for the message to clear.

Print Jobs on
Disk. Go/Stop?

What this message means:

Jobs that were spooled to the hard disk before the printer was last turned off have not yet
printed.

What you can do:

Содержание T620






























































































































































































































Результаты поиска

Содержание T620

Отзывы:

Бренды по названию

Популярные бренды

Lexmark T620, Руководство пользователя

Результаты поиска

Содержание T620

Отзывы:

Бренды по названию

Популярные бренды