Lexmark Pro910 Series, Руководство по обслуживанию

Страница: 48 / 118

3-12
Service Manual
Lexmark Pro910 Series
Go Back
Previous
Next
3.
The sensor’s state changes.
4.
Touch or to cancel the test and return to the Manufacturing Test menu.
Tray[x] Paper Out Sensor Test
To perform this test:
1.
From the Manufacturing Test menu, navigate to Tray[x] Paper Out Sensor Test .
2.
Load paper into the tray.
3.
The sensor’s state changes.
4.
Touch or to cancel the test and return to the Manufacturing Test menu.
Tank Receiver Test
This test verifies the communication between the printer and the chip embedded in each ink tank. This test only
checks communication and does not necessarily check for security.
To perform this test:
1.
From the Manufacturing Test menu, navigate to Tank Receiver Test .
2.
The result for each tank appears on the display.
•
If the printer is able to connect and to communicate with the tank the result is
Passed
.
•
If the printer is not able to connect with the tank, the result is
Failed
.
3.
Touch or to cancel the test and return to the Manufacturing Test menu.
Align Printer
This option aligns the printhead.
To perform this procedure:
1.
From the Manufacturing Test menu, navigate to Align Printer .
2.
Follow the instructions on the display.
3.
Touch to cancel the test, and touch to return to the Manufacturing Test menu.
Result
Paper High in Tray [x]
When more than 30 sheets are detected by the sensor.
Paper Low in Tray [x]
When 1–30 sheets are detected by the sensor.
Result
Paper In in Tray [x]
When paper is detected by the sensor.
Paper Out in Tray [x]
When paper is not detected by the sensor.