Lexmark 5060-00x, Руководство по обслуживанию, Страница: 59 / 490

Diagnostic information
2-25
5060-00 x
2xx Paper jam message table
Note: A secondary message only displays if the finisher option is installed. Use the “Sub error code table” on
page 2-17 to help diagnose paper jam problems.
2 xx
code
Primary message Secondary message Description
200 Paper Jam
Clear Paper Path
(Jam location
information)
Leave sheets in
Finisher area 5 Primary: Paper is jammed at the printer input
sensor. Open the printer left door to access the
paper jam. If sheets have been accumulated to be
stapled or offset when the jam occurred, the printer
alternately flashes the primary and secondary
messages to indicate that all accumulated sheets
not be removed during the jam clearing procedure.
If the problem persists, go to
“200 Paper jam—
Tray 1” on page 2-67 .
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearing procedure as the printer will not reprint the
removed sheets. Also, if the accumulated sheets
are removed, the portion of the job printed after the
jam will not be stapled.
201 Paper Jam
Clear Paper Path
(Jam location
information)
Leave sheets in
Finisher area 5 Primary: Paper is jammed at the fuser. Open the
right door to access the jam area. If sheets have
been accumulated to be stapled or offset when the
jam occurred, the printer alternately flashes the
primary and secondary messages to indicate that
all accumulated sheets not be removed during the
jam clearing procedure. If the problem persists, go
to
“201 Paper jam” on page 2-71 .
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearing procedure as the printer will not reprint the
removed sheets. Also, if the accumulated sheets
are removed, the portion of the job printed after the
jam will not be stapled.
202 Paper Jam
Clear Paper Path
(Jam location
information)
Leave sheets in
Finisher area 5 Primary: A paper jam has occurred at the fuser.
Open the right door to access the jam area. If
sheets have been accumulated to be stapled or
offset when the jam is detected, the printer
alternately flashes the primary and secondary
messages to indicate that all accumulated sheets
should not be removed during the jam clearing
procedure. If the problem persists, go to
“202
Paper jam” on page 2-73 .
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearing procedure. The printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.