manualshive.com logo in svg

Lexicon MPX G2, Руководство по обслуживанию

Поделиться
Скачать
Lexicon MPX G2 Скачать руководство пользователя страница 42

MPX G2

 Service Manual

4-30

MIDI Test:
         Passed     (done)

Footpedal Functionality

This test will quickly verify that the MPX G2 footpedal circuitry is functioning. A generic foot controller with a
potentiometer value from 10K-500K should be used. A more thorough test of the circuitry using a custom
built Foot Controller  (Spec reference: Lexicon part # 770-08508) can be found in the Troubleshooting
section of this manual.

When using a generic foot controller, the operator must vary the pedal over its entire range from minimum
(pedal fully up) to maximum (pedal fully down) within 5 seconds after the test is executed. Otherwise, the
test will fail.

1.  Connect the footpedal to the MPX G2 rear panel Foot Pedal jack and place the pedal in the up position.
2.  Press and hold the Edit button while powering up the MPX G2.
3.  Release the Edit button when the display reads the following:

Diags: Test
                                                                        < Function Tests

4.  At the Functions Tests menu turn the Encoder until the display reads the following:

   Diags: Tests

                    <          Footpedal

5.  Press the Store button (which should be flashing). The display will read the following:

                             Footpedal Test:
                             Testing...

6.  Within 5 seconds, move the pedal over its entire range (min to max).
7.  If the test passes, the display reads:

                           Footpedal Test:
                           Passed   (done)

8.  To Exit test press and hold the < button.

Footswitch Functionality

This test will quickly verify that the MPX G2 footswitch circuitry is functional. For this test a generic dual
momentary footswitch or Lexicon footswitch (Lexicon P/N 750-09277) must be used.

1.  Connect the footswitch to the MPX G2 rear panel Footswitch jack.
2.  Press and hold the Edit button while powering up the MPX G2.
3.  Release the Edit button when the display reads the following:

Diags: Test
                                                                        < Function Tests

4.  At the Functions Tests menu turn the Encoder until the display reads the following:

Diags: Tests

                              <               Switch

5.  Press the Store button (which should be flashing).The display will read the following:

Содержание MPX G2






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды