manualshive.com logo in svg

Lexicon MPX G2, Руководство по обслуживанию

Поделиться
Скачать
Lexicon MPX G2 Скачать руководство пользователя страница 41

Lexicon

4-29

3.  Press the Yes button 5 times. The display will read Gain InLvl Level. The value under the Level will be

flashing. Set it for (36).

4.  Press the System button until the display reads: System select Development.
5.  Press the Yes button twice. The display reads: Devel DSP Bypass. Turn the knob CCW to set this to

Byp 0.

6.  Press the Yes button 14 times. The display reads: Devel Feel. Verify that it is set to 0.
7.  Press the Yes button once. The display reads: Devel Driver 0. Turn the knob CW to set its value to 30.
8.  Press the Yes button twice. The display reads: Devel Bass 0. Turn the knob CW to set its value to +10.
9.  Press the Yes button once. The display reads: Devel Trebl 0. Turn the knob CCW to set its value to -8.
10.  Press the Yes button 3 times. The display reads: Devel GTone. Verify that it is set to On 1.
11.  Press the Yes button once. The display reads: Devel FGood Out 0. Turn the knob CW to set the circuit

In 1.

12.  Press the Yes button 2 times. The display reads: Devel Gain. Verify that it is set to On 1.
13.  Turn off the oscillator.
14.  Verify an output level reading between -49.94 to -120 dBu (2.5 to 0.8 mVRMS).
15.  Move the cable from the Right Main Output jack to the Left Main Output Jack.
16.  Verify an output level reading between -49.94 to -120 dBu (2.5 to 0.8 mVRMS).
17.  Turn the oscillator back on.

Input to Output Volume at (0) Test:
1.  Apply a 1kHz-sinewave signal at -77 dBu (109 uVRMS).
2.  Verify an output level reading between -34.94 to -37.06 dBu (14 to 11 mVRMS).
3.  Move the cable from the Left Main Output jack to the Right Main Output Jack.
4.  Verify an output level reading between -34.94 to -37.06 dBu (14 to 11 mVRMS).

Input to Output Volume at (-64) Test:
1.  Press the Edit button. The display reads: Edit Select Mix.
2.  Press the Gain button. The display reads: Gain Select Crunch.
3.  Press the Yes button 4 times. The display reads: Gain InLvl Level with the value under InLvl flashing.

Turn the knob CCW for a level setting of -64.

4.  Verify an output level reading between -65 to -95 dBu (436 to 014 uVRMS).
5.  Move the cable from the Right Main Output jack to the Left Main Output Jack.
6.  Verify an output level reading between -65 to -95 dBu (436 to 014 uVRMS).

Midi Functionality

This test will quickly verify that the MPX G2 MIDI circuitry transmits and receives MIDI data. A more
thorough test of the Midi circuitry can be found in the Troubleshooting section of this manual.

1.  Connect one end of a Midi cable to the MPX G2 Midi Out jack and the other end to the MPX G2

Remote/In jack.

2.  Press and hold the Edit button while powering up the MPX G2.
3.  Release the Edit button when the display reads the following.

Diags: Test
         < Function Tests

4.  Turn the front panel knob CW until the display reads.

Diags: Tests
        <                 MIDI

5.  Press the Store button ( which should be flashing ).
6.  If the test passes, the display will read

Содержание MPX G2






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды