manualshive.com logo in svg

Lexicon MPX G2, Руководство по обслуживанию

Поделиться
Скачать
Lexicon MPX G2 Скачать руководство пользователя страница 14

MPX G2

 Service Manual

4-2

16.  Press the Yes button. The display reads: NoiseGate ATime. Press Yes and turn the knob CW until

setting is at 20.

17.  Press the Yes button. The display reads: NoiseGate HTime. Press Yes and turn the knob CCW until

setting is at 20.

18.  The MPX G2 now has to be placed in a test program called Development. This will require several

steps before the remaining settings for the Performance Section are set properly.
18.1. 

Press the System button. The display reads: System Select: Audio

18.2. 

Turn the knob CW until the display reads: System Select: MIDI.

18.3. 

 Press the Yes button 4 times until the display reads: MIDI Ctl Send None = None

18.4. 

 Press the Options button the display reads: MIDI Reset Press YES

18.5. 

 Press and hold the Effect 1 button until the display reads: Debug Mode then release.

18.6. 

 Press the Options button. The display reads: MIDI Ctl Send None=None.

18.7. 

 Press the No button 4 times until the display reads: System Select: MIDI.

18.8. 

 Turn the knob CW until the display reads: System Select :Development

19.  The Development Diagnostics Menu will now be available.
20.  Press the Yes button Twice until the display reads: Devel DSP Bypass. Turn the knob to set this to Byp

0.

21.  Press the Yes button Five times until the display reads: Devel Insrt Type. Turn the knob CCW to set this

to Stereo.

22.  Press the Yes button Eight times until the display reads: Devel LoCut. Turn the knob to set this to 0.
23.  Press the Yes button Three times until the display reads: Devel HiCut. Turn the knob to set this to 0.
24.  Press the Yes button once. The display reads: Devel Bass. Turn the knob to set this to 0.
25.  Press the Yes button once. The display reads: Devel Trebl. Turn the knob to set this to 0.
26.  Press the Yes button three times until the display reads: Devel Gtone. Turn the knob CCW  to Byp 0.
27.  Press the Yes button once. The display reads: Devel Fgood. Turn the knob to set this to Out 0.
28.  Press the Yes button twice. The display reads: Devel Gain. Turn the knob CCW to Byp 0.
29.  Press the Yes button twice. The display reads: Devel Send. Turn the knob to set this to Gn 0.
30.  Press the Yes button once. The display reads: Devel Mute. Turn the knob CCW to Byp 0.
31.  Press the Program button. The display reads: Clean Slate.

The MPX G2 is now ready for the tests that follow.
For each test, you will be instructed to make different setting changes to the above procedure, mainly in the
form of input levels. All measurements fall within a range containing both Upper and Lower limit rather than
a set number. The range values will be listed as Upper limit values first and Lower limit values.

Note:  In the tests to follow, Input refers to the Rear Guitar Input Jack on the back of the MPX G2.

32.  Connect an audio input cable between the Low Distortion Oscillator and the MPX G2 Rear Guitar Input

jack.

33.  Connect an audio output cable from the Insert Send output jack on the rear of the MPX G2 to the

Distortion Analyzer.

Содержание MPX G2






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды