manualshive.com logo in svg

Lexicon MPX G2, Руководство по обслуживанию

Поделиться
Скачать
Lexicon MPX G2 Скачать руководство пользователя страница 29

Lexicon

4-17

4.  Move the cable from the Left Main Output jack to the Right Main Output Jack.
5.  Verify its output level reading is between 27.06 to 24.94 dBu (17.5 to 13.7 Vrms).

Signal Level with 600

Ω

 Load:

1.  Apply a 1kHz-sinewave signal with a 600

Ω

 load at -11dBu (218 mVRMS).

2.  Verify an output level reading between 17.86 to 15.74 dBu (6 to 4.7 Vrms).
3.  Move the cable from the Right Insert Return jack to the Left Insert Return jack.
4.  Move the cable from the Right Main Output Jack to the Left Main Output Jack.
5.  Verify its output level reading is between 17.86 to 15.74 dBu (6 to 4.7 Vrms).
6.  Remove the 600

Ω

 load.

Frequency Response Measurement:
1.  Disable all Filters on the Distortion Analyzer.
2.  Apply a 1kHz-sinewave signal at -11dBu (218 mVRMS).
3.  Set the Analyzer for a 0dB reference.
4.  Verify the output level reading is between 1.06 to -1.56 dBu (875 to 647 mVRMS) at the following

frequency settings.

20,000Hz

16,000Hz

12,000Hz

10,000Hz

4,000Hz

2,000Hz

250Hz

100Hz

60Hz

20Hz

5.  Move the cable from the Left Insert Return jack to the Right Insert Return jack.
6.  Move the cable from the Left Main Output jack to the Right Main Output Jack.
7.  Verify the output level reading is between 1.06 to -1.56 dBu (875 to 647 mVRMS) at the following

frequency settings.

20,000Hz

16,000Hz

12,000Hz

10,000Hz

4,000Hz

2,000Hz

250Hz

100Hz

60Hz

20Hz

8.  Enable the Lo pass filters on the analyzer (30kHz or 20kHz).

Crosstalk Left/Right Measurements:
1.  Move the cable from the Right Main Output Jack to the Left Main Output Jack.
2.  Verify the crosstalk output level reading is between -62.94 to -120 dBu (552 to 1.2 uVRMS) at the

following frequency settings.

20,000Hz

15,000Hz

10,000Hz

5,000Hz

3,000Hz

997Hz

100Hz

20Hz

3.  Move the cable from the Right Insert Return jack to the Left Insert Return jack.
4.  Move the cable from the Left Main Output jack to the Right Main Output Jack.
5.  Verify the crosstalk output level reading is between -62.94 to -120 dBu (552 to 1.2 uVRMS) at the

following frequency settings.

20,000Hz

10,000Hz

997Hz

100Hz

THD+N Measurement:
1.  Connect an audio input cable between the Low Distortion Oscillator and the MPX G2 Left Insert Return

jack.

2.  Connect an audio output cable from the Left Main ¼” Output jack on the rear of the MPX G2 to the

Distortion Analyzer.

Содержание MPX G2






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды