manualshive.com logo in svg

Lexicon MPX G2, Руководство по обслуживанию

Поделиться
Скачать
Lexicon MPX G2 Скачать руководство пользователя страница 21

Lexicon

4-9

3.  Press the Yes button twice. The display reads: Devel DSP Bypass On 1. Turn the knob CCW to turn

the DSP circuit to Byp 0.

4.  Press the Yes button 21 times. The display reads: Devel Gtone. Turn the knob and set the level to Byp

0.

5.  Press the No button 4 times. The display reads: Devel Bass. Turn the knob and set the level to 0.
6.  Press the Yes button once. The display reads: Devel Trebl. Turn the knob and set the level to 0.
7.  Press the Yes button 6 times the display reads: Devel Gain Byp 0. Turn the knob CW to turn the Gain

circuit On 1.

8.  Press the Edit button 3 times. The display reads: Edit Select Mix.

Signal Level:
1.  Apply a 1kHz-sinewave signal at -5.5dBu (411 mVRMS).
2.  Set the Analyzer for a 0dB reference (@ 1kHz).
3.  Verify an output level reading between 10.7 to 11.76dBu (2.7 to 3.0 Vrms).
4.  Press the System button. The display reads: Devel Gain On 1.
5.  Press the No button 9 times until the display reads: Devel Drive 0. Turn the knob CW to set the Drive

level to 60.

6.  Apply a 1kHz-sinewave signal at -70.5dBu (231 mVRMS).
7.  Set the Analyzer for a 0dB reference (@ 1kHz).
8.  Verify an output level reading between 4.4 to 2.2dBu (1.3 to 1.0 Vrms).
9.  Turn the knob CCW and set the Drive level to 0.
10.  Press the Yes button 4 times. The display reads: Devel M-Vol 42 Turn the knob CCW to set the Volume

level to -60.

11.  Apply a 1kHz-sinewave signal at -10.5dBu (231 mVRMS).
12.  Set the Analyzer for a 0dB reference (@ 1kHz).
13.  Verify an output level reading between -54.34 to -55.46 dBu (1.5 to 1.3 mVRMS).
14.  Turn the knob CW and set the Drive M-Vol to -14.
15.  Press the Yes button 3 times. The display reads: Devel FGood Out 0. Turn the knob CW so the setting

is In 1. This will engage the Feel Good circuit.

16.  Press the No button 7 times. The display reads: Devel Drive 0. Turn the knob CW for a setting of 10.
17.  Press the No button once. The display reads: Devel Feel 0. Turn the knob CW for a setting of 8.

Note: In the following part of this test an oscillator with a tone burst function must be set for the specs below
in step 18. The resulting output from the MPX G2 must be feed to a storage oscilloscope that is capable of
measuring and storing the information in time domain as indicated in the 2 graphs below.

18.  Apply a 1kHz-sinewave signal Burst at -6dBu (388 mVRMS).
19.  Set the Analyzer for a 0dB reference (@ 1kHz).
20.  The tone burst is measured in a time domain. Measure the positive peak amplitude at various times

during the test from (0-28ms). The waveform measurement should look like the following signal in the
figure below. Notice that the amplitude of each peak in the burst decreases over time.

Содержание MPX G2






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды