Leviton NorthStar Site Controller Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 65

background image

7 ADMINISTRATION

53

7.5

Updating the NorthStar Site Controller

The NorthStar hardware and application are continually evolving. From time to
time Leviton will make new versions available. When this occurs, you'll want to
update your site controller to take advantage of the newest functionality. This
is accomplished using a NorthStar update drive available from Leviton, or via a
downloaded ﬁle and the

System Upgrade

button within the

Backup/Restore

tab.

NOTE:

While it is possible to upgrade cellular equipped site controllers remotely,

Leviton recommends that these units be upgraded using USB to avoid the data
charges that may be associated with cellular service.

CAUTION:

Do not power cycle the site controller or any lighting controller within your

installation during an update. This could corrupt the ﬁle system in a way that could
require complete replacement. During an update the lights on the site controller
will continue to blink throughout the update process. You should wait at least ﬁve
minutes after an update before power cycling a site controller or lighting controller.

To update the NorthStar site controller using the System Upgrade button:

1.

Log in to the site controller you wish to update, then click

Conﬁg - Backup/

Restore

to open the

Backup/Restore

tab.

2.

Verify you have a current backup of your system. For more information on
backing up the system, see Backing up and restoring a system conﬁguration on
page 55.

3. Obtain the new NorthStar update ﬁle from Leviton.

4.

Click the

System Upgrade

button. When the pop up menu appears, click

System Upgrade

again to conﬁrm your intention to upgrade.

5.

Browse to and select the update ﬁle, then click

Open

to start the update

process. The lights on the site controller will blink continuously during the
update. If the lights ﬂash red, contact Leviton Customer Support for possible
solutions.

6.

After the lights have stopped ﬂashing green for at least ﬁve minutes, unplug the
USB drive and power cycle the controller.

NOTE:

During an update, the lighting controllers will blink their corresponding lights

when each individual update is completed.

WEB

VERSION

«
...
52
53
54
55
56
...
»

Содержание NorthStar Site Controller


































































Отзывы:

Нет отзывов

Похожие инструкции для NorthStar Site Controller

Бренд: GBD Страницы: 12

Бренд: Haier Страницы: 58

Бренд: Calpeda Страницы: 4

ACTIVE DRIVER M/M 1.1

Бренд: DAB Страницы: 10

Бренд: d&b audiotechnik Страницы: 3

ACTIVE DRIVER M/M 1.1

Бренд: DAB PUMPS Страницы: 38

Бренд: Fanimation Страницы: 2

Бренд: M2M Страницы: 24

Бренд: ICM Controls Страницы: 2

Бренд: NCR Страницы: 8

Бренд: UniPOS Страницы: 51

Бренд: Unipulse Страницы: 126

Бренд: YachtSafe Страницы: 3

Бренд: RadioMaster Страницы: 49

SUPERREMOTE UR19A

Бренд: X10 Страницы: 3

Бренд: Xantech Страницы: 102

Бренд: Xantech Страницы: 17

Бренд: X10 Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды