Leviton NorthStar Site Controller Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 65

background image

2.3

Methods for New Installation

There are four primary ways to set up a

NorthStar

installation. Use the detailed steps

included as an appendix to ensure the different processes don't run together.

NOTE:

Physical installation of lights is performed before or after commissioning,

but these instructions assume that the lights are already installed and powered up.
In cases where a scan of the 2D barcode or reading of a MAC address will be difﬁcult
post-installation, be sure to record the Controller Type, MAC address, and location of
each NorthStar device before it's placed in a permanent home. It's also possible, and
easiest, to use the Leviton Lighting Installer app to scan these devices as they're being
physically installed.

2 INSTALLATION AND INITIAL SETUP

9

2.3.1 Use the Leviton Lighting App

The easiest and fastest way to get a

NorthStar

installation commissioned is through

the

Leviton Lighting Installer app

. Built for the Android platform, the Lighting Installer

app walks you through the commissioning process and then exports everything to the
NorthStar Site Controller to ensure that you're up and running as soon as possible.

2.3.2 Install Hardware and Discover Unconﬁgured Devices

As soon as a lighting controller receives power, it can be discovered by the Census

function. This means that an installation is performed by discovering devices and
then adding them into your installation. Each time the census runs, it will only contact
lights that are in communication with a conﬁgured light controller. As controllers are
added and conﬁgured, you'll need to run the census again to collect lights that are
progressively further away. To learn more about using the Census button for site
conﬁguration, see Using Census for Site Commissioning on page 60.

2.3.3 Create and Import a .CSV ﬁle

While not as easy as the

Lighting Installer app

or

Census button

, a comma-

separated value (CSV) ﬁle is still easier than doing everything manually. NorthStar
supports easy import of .CSV ﬁles that are created in any spreadsheet or text editor
program. You'll enter data on each of the lights, and the bulk of the conﬁguration will be
completed with one import. To learn more about creating and importing a .CSV ﬁle for
site conﬁguration, see Site Conﬁguration Using a CSV File on page 61.

2.3.4 Enter Everything Manually

If your installation is small, or you're REALLY into lighting conﬁguration, everything can

be entered manually. This works great if you're adding new equipment to an existing
installation, but we'll go ahead and caution you not to do this if you're just starting out.

WEB

VERSION

«
...
8
9
10
11
12
...
»

Содержание NorthStar Site Controller


































































Отзывы:

Нет отзывов

Похожие инструкции для NorthStar Site Controller

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 10

Бренд: JDS Uniphase Страницы: 27

Бренд: Danfoss Страницы: 20

Бренд: OEG Страницы: 168

Бренд: Jeep Страницы: 32

Бренд: Accel Страницы: 8

CITY ELITE SINGLE

Бренд: Baby Jogger Страницы: 3

Бренд: Hama Страницы: 7

Бренд: Hama Страницы: 44

Бренд: RadioMaster Страницы: 10

Бренд: K&K Страницы: 6

Бренд: Jandy Страницы: 28

Бренд: Jands Страницы: 6

Бренд: Mackie Страницы: 4

Бренд: Maclaren Страницы: 15

Бренд: Maclaren Страницы: 9

Бренд: Maclaren Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды