Leviton NorthStar Site Controller Скачать руководство пользователя страница 51

Страница: 51 / 65

7 ADMINISTRATION

7.3.3 Editing Zone Settings

To edit a Zone's settings, select the zone and click the appropriate option

(Manage

Lights / Apply Behavior / Edit Zone Name / Delete Zone)

from the bottom of the

zone window.

7.3.4 Adding Lights to Zones

A light can belong to multiple zones and will be affected by each command issued
to any zone the light is a member of. Adding a single light to a zone is accomplished
from the panel of the corresponding light or zone.

To add a light to a zone using the Light Panel:

Click

the

Devices / Lights and Sensors

icon in the left menu bar.

Locate the panel for the light you wish to add to a zone, and click the three dots
on the right side of the panel and click

Edit

to open the edit pane.

Click the

Select Zones

button and select the zone(s) that you'd like to add the

light to.

NOTE:

A light may belong to up to 20 zones.

Click the

Save Changes

button at the bottom of the screen to complete the

changes, or the

Cancel

button to exit without saving.

WEB

VERSION

Содержание NorthStar Site Controller


































































Результаты поиска

Содержание NorthStar Site Controller

Отзывы:

Похожие инструкции для NorthStar Site Controller

Бренды по названию

Популярные бренды

Leviton NorthStar Site Controller, Руководство пользователя

Результаты поиска

Содержание NorthStar Site Controller

Отзывы:

Похожие инструкции для NorthStar Site Controller

Бренды по названию

Популярные бренды