Leviton NorthStar Site Controller Скачать руководство пользователя страница 43

Страница: 43 / 65

6 OPTIMIZING

CONTROL

6.2.1 Possible Warnign Signs

When a Warning is generated, it will list a type for the warning type and a description.
Possible warnings are divided into two categories:

Warning

Description

Triggered by

Authentication

Failure

A server login attempt has failed.

A user attempted to login with an invalid

password.

Communication

Failure

Contacting the lighting controller was

unsuccessful.

The site controller attempted to contact a light

controller but did not receive the expected

response.

Conﬁguration

Failure

The lighting conﬁguration push was

unsuccessful

The site controller attempted to push

conﬁguration to a controller but did not receive

the expected response.

Sensor

Threshold

Failure

A reported sensor value is outside of the

conﬁgured thresholds.

A status poll retrieved sensor data from

a device that was outside of conﬁgured

thresholds.

Warning

Description

Triggered by

Bridge Change

Failure

Changing the network settings was

unsuccessful.

The bridge did not acknowledge the new

network settings.

Bridge Node

Timeout

The site controller is unable to

communicate to the bridge controller.

The bridge controller does not respond to the

site controller at startup.

Encryption

Disabled

Mesh network encryption is not enabled.

By default, encryption is not enabled. For

information on how to enable encryption, see

Set and Encrypt the SNAP Cmmunications

Channl on page 23.

I2C Write Fault

Failure

An error occurred writing I2C data.

The data written was not read back correctly.

Install Outdated

The NorthStar version installed is out of

date with the running code.

The current version of NorthStar has not

had the install process run against the site

controller.

Invalid

Controller Type

One of the controllers or unmanaged

devices has an invalid controller type.

The controller type was removed from the

system after a device had already been added.

Link Quality

Failure

The link quality to a light is insufﬁcient

for normal operation.

A network census found a light that cannot

communicate well enough to guarantee good

operation.

Network

Change Failure

Changing the network settings was

unsuccessful

A controller did not acknowledge the new

network settings.

Poll Exception

Failure

An exception occurred reading wireless

RPC data.

Unexpected or corrupt information was

received over the air.

Administrator-speciﬁc Alarms

General Alarms

WEB

VERSION

Содержание NorthStar Site Controller


































































Результаты поиска

Содержание NorthStar Site Controller

Отзывы:

Похожие инструкции для NorthStar Site Controller

Бренды по названию

Популярные бренды

Leviton NorthStar Site Controller, Руководство пользователя

Результаты поиска

Содержание NorthStar Site Controller

Отзывы:

Похожие инструкции для NorthStar Site Controller

Бренды по названию

Популярные бренды