Leviton NorthStar Site Controller Скачать руководство пользователя страница 46

Страница: 46 / 65

6 OPTIMIZING

CONTROL

6.4 Email

Alerts

The NorthStar site controller is conﬁgured to send email notiﬁcations when alarms are
generated within the system. This can help responsible persons know immediately
whenever something has occurred that might need their attention.

This service must be enabled and a list of persons who will receive the alerts must be
conﬁgured before Email alerts can be used.

To enable email alerts:

Open

the

Alerts

tab by clicking

Conﬁg - Alerts

Enter a descriptive name for the site controller in the

Gateway Name

ﬁeld. This

name will help identify which site controller is generating the alert if you have
more than one site controller.

Click

the

Enable

toggle under

Enable Alerts

Click the

Save Changes

button to ﬁnish enabling

Alerts

, or the

Cancel

button to

exit without enabling

Alerts

NOTE:

To use the email alerts function, the site controller must have internet access

and email functionality. If you get an error when attempting to enable email alerts,
contact customer support.

To enter email addresses for persons who will receive alerts:

Open

the

Alerts

tab by clicking

Conﬁg - Alerts

In the ﬁeld under

Email Addresses

, enter the email address for the person you

wish to add.

If you're adding more than one email address, click the

Add New

button to

generate a new email address ﬁeld, then enter the next email address you wish
to add. Continue to repeat these steps until all addresses are entered.

4. When all email addresses are entered, click the

Save Changes

button.

WEB

VERSION

Содержание NorthStar Site Controller


































































Результаты поиска

Содержание NorthStar Site Controller

Отзывы:

Похожие инструкции для NorthStar Site Controller

Бренды по названию

Популярные бренды

Leviton NorthStar Site Controller, Руководство пользователя

Результаты поиска

Содержание NorthStar Site Controller

Отзывы:

Похожие инструкции для NorthStar Site Controller

Бренды по названию

Популярные бренды