LevelOne ProCon GSW-1290, Руководство пользователя

Страница: 32 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Figure 2-9. Assigning the Switch an IP Address
In the above example, the Switch was assigned an IP address of 20.1.10.100 with a subnet mask of
255.0.0.0. The system message
Success indicates that the command was executed successfully. The Switch
can now be configured and managed via Telnet and the CLI or via the Web-based management.
Connecting Devices to the Switch
After you assign IP addresses to the Switch, you can connect devices to the Switch.
To connect a device to an SFP transceiver port:
Use your cabling requirements to select an appropriate SFP transceiver type.
Insert the SFP transceiver (sold separately) into the SFP transceiver slot.
Use the appropriate network cabling to connect a device to the connectors on the SFP transceiver.
NOTICE: When the SFP transceiver acquires a link, the associated
integrated 10/100/1000BASE-T port is disabled.
32