![background image](http://html1.mh-extra.com/html/levelone/procon-gsw-1290/procon-gsw-1290_user-manual_1884670026.webp)
LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
GSW-1290:4#config stacking mode enable
Command: config stacking mode enable
The new stacking mode configuration must be saved and the system restarted
to put the new settings into effect.
If you do not save the changes now, they will be lost.
Saving all configurations to NV-RAM... 15%
Changing the stacking mode in the GSW-1290 will automatically save the settings and restart the system. It
will take a few minutes to complete the process.
Unit ID Display for Switches in a Switch Stack
The Stack ID 7-segment LED (as shown below) on the front panel of the GSW-1290 will always display F
(15 in hex). An F will also be displayed in the Stack ID LED even if the GSW-1290 is in standalone mode.
Figure 2-5. GSW-1290 Front Panel (left side)
The Unit ID of individual GSW-2492 Switches in a Switch stack is determined by the port number of the
port on the GSW-1290 that the Switch is connected to. The ports on the GSW-1290 are numbered starting
with port 1 from left to right along the front panel of the Switch. For example, the four combination ports
next to the Stack NO. LED are numbered 1 through 4, so if a four port stacking module is installed in the
first module slot, the stacking ports will be numbered 5 through 8. If two stacking modules are installed in
the GSW-1290, then the stacking ports on the second module will be numbered 9 through 12.
Figure 2-6. MDU-1290S Stacking Module Front Panel
If the a stacking module is installed in the GSW-1290’s first module slot, then the first IN/OUT pair in the
figure above will be port 5. If a GSW-2492 in a Switch stack is connected to the first stacking port (port
number 5 on the GSW-1290), then the Unit ID of the GSW-2492 will be 5.
The Unit ID of the GSW-2492 will be displayed in the STACK NO. LED on the front panel of the GSW-
2492’s stacking module, as shown below.
26
Содержание ProCon GSW-1290
