LevelOne ProCon GSW-1290, Руководство пользователя

Страница: 31 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Figure 2-8. Boot screen
The Switch’s MAC address can also be found from the Web management program on the Switch
Information (Basic Settings) window on the Configuration menu.
The IP address for the Switch must be set before it can be managed with the Web-based manager. The
Switch IP address can be automatically set using BOOTP or DHCP protocols, in which case the actual
address assigned to the Switch must be known.
The IP address may be set using the Command Line Interface (CLI) over the console serial port as follows:
Starting at the command line prompt, enter the commands
config ipif System ipaddress
xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy . Where the x ’s represent the IP address to be assigned to the IP interface
named System and the y ’s represent the corresponding subnet mask.
Alternatively, you can enter config ipif System ipaddress xxx.xxx.xxx.xxx/z . Where the x ’s represent the
IP address to be assigned to the IP interface named System and the z represents the corresponding number
of subnets in CIDR notation.
The IP interface named System
on the Switch can be assigned an IP address and subnet mask that can then
be used to connect a management station to the Switch’s Telnet or Web-based management agent.
31