background image

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch

 

Forwarding & Filtering 

The Switch allows permanent or static entries into the forwarding database (FDB). These FDB entries are 
MAC addresses that will not age out. In addition, multicast forwarding may be customized to conform to 
rules for the different ports by setting up multicast filter modes for each port. 

Unicast Forwarding 

Open the 

Forwarding & Filtering

 folder and click on the 

Unicast Forwarding

 link. This will open the 

Setup Static Unicast Forwarding Table 

window, as shown below. 

 

Figure 4- 13. Setup Static Unicast Forwarding Setup and table 

To add an entry, define the following parameters: 

Parameter  

Description 

VLAN ID 

The VLAN ID number of the VLAN on which the above Unicast MAC address 
resides. 

MAC Address 

The MAC address to which packets will be statically forwarded. This must be 
a unicast MAC address. 

Allowed to Go to 
Unit 

Allows the designation of the module on which the above MAC address 
resides.  

Port 

Choose the port on which the MAC address resides. Selecting Port 0 means 
no ports are allowed. 

Click on the 

Add/Modify

 button to add a unicast MAC address to the Switch’s forwarding table, or to 

modify a previous entry. 
 
 
 
 
 

 
 

65

Содержание ProCon GSW-1290

















































































































































Отзывы: