LevelOne ProCon GSW-1290, Руководство пользователя

Страница: 63 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
STP Port Settings
Figure 4- 12. STP Port Settings and Information menu
In addition to setting Spanning Tree parameters for use on the Switch level, the Switch allows for the
configuration of groups of ports, each port-group of which will have its own spanning tree, and will require
some of its own configuration settings. An STP Group will use the Switch-level parameters entered above,
with the addition of Port Priority and Port Cost.
An STP Group spanning tree works in the same way as the Switch-level spanning tree, but the root bridge
concept is replaced with a root port concept. A root port is a port of the group that is elected on the basis of
port priority and port cost, to be the connection to the network for the group. Redundant links will be
blocked, just as redundant links are blocked on the Switch level.
The STP on the Switch level blocks redundant links between Switches (and similar network devices). The
port level STP will block redundant links within an STP Group.
It is advisable to define an STP Group to correspond to a VLAN group of ports.
63