![background image](http://html1.mh-extra.com/html/levelone/procon-gsw-1290/procon-gsw-1290_user-manual_1884670050.webp)
LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Port Configuration
To configure basic port settings such as port speed, duplex, and learning state, use the
Port Configuration
window.
Click the Port Configuration link in the Configuration folder:
Figure 4- 1. Port Configuration and Information table
To configure Switch ports:
1. Choose
the
Unit
from the pull-down menu.
2. Choose the port or sequential range of ports using the
From…To…
port pull-down menus.
3. Use the remaining pull-down menus to configure the parameters described in the table below.
The configurable parameters for ports include the following:
Parameter
Description
State
<
Enabled
>
Toggle the State field to either enable or disable a given port.
Speed/Duplex
<
Auto
>
Toggle the Speed/Duplex field to either select the speed and
duplex/half-duplex state of the port.
Auto
– auto-negotiation between
10 and 100 Mbps devices, full- or half-duplex. The Auto setting
allows the port to automatically determine the fastest settings the
device the port is connected to can handle, and then to use those
settings. The other options are
1000M/Full
,
1000M/Half
,
100M/Full
,
100M/Half, 10M/Full,
and
10M/Half.
There is no automatic
adjustment of port settings with any option other than
Auto
.
Flow Control
Displays the flow control scheme used for the various port
configurations. Ports configured for full-duplex use 802.3x flow
control, half-duplex ports use backpressure flow control, and Auto
ports use an automatic selection of the two. The default is
Disabled
.
Learning
Enable or disable MAC address learning for the selected ports. When
Enabled
, destination and source MAC addresses are automatically
50
Содержание ProCon GSW-1290
