LevelOne GEL-1061, Руководство пользователя

Страница: 72 / 500

Chapter 3
| Basic Management Tasks
Managing System Files
– 72 –
◆
The path to the directory must also be defined. If the file is stored in the root
directory for the FTP/TFTP service, then use the “/” to indicate this (e.g., ftp://
192.168.0.1/).
◆
The file name must not be included in the upgrade file location URL. The file
name of the code stored on the remote server must be
level1-xx61.bix (using
upper case and lower case letters exactly as indicated here). Enter the file name
for other switches described in this manual exactly as shown on the web
interface.
◆
The FTP connection is made with PASV mode enabled. PASV mode is needed to
traverse some fire walls, even if FTP traffic is not blocked. PASV mode cannot be
disabled.
◆
The switch-based search function is case-insensitive in that it will accept a file
name in upper or lower case (i.e., the switch will accept
LEVEL 1-xx61.BIX from
the server even though LEVEL 1-xx61.bix was requested). However, keep in
mind that the file systems of many operating systems such as Unix and most
Unix-like systems (FreeBSD, NetBSD, OpenBSD, and most Linux distributions,
etc.) are case-sensitive, meaning that two files in the same directory,
level 1-
xx61.bix and LEVEL 1-xx61.bix are considered to be unique files. Thus, if the
upgrade file is stored as LEVEL 1-xx61.bix (or even LeveL 1-xx61.bix ) on a case-
sensitive server, then the switch (requesting gel-1061-series.bix ) will not be
upgraded because the server does not recognize the requested file name and
the stored file name as being equal. A notable exception in the list of case-
sensitive Unix-like operating systems is Mac OS X, which by default is case-
insensitive. Please check the documentation for your server’s operating system
if you are unsure of its file system’s behavior.
◆
Note that the switch itself does not distinguish between upper and lower-case
file names, and only checks to see if the file stored on the server is more recent
than the current runtime image.
◆
If two operation code image files are already stored on the switch’s file system,
then the non-startup image is deleted before the upgrade image is transferred.
◆
The automatic upgrade process will take place in the background without
impeding normal operations (data switching, etc.) of the switch.
◆
During the automatic search and transfer process, the administrator cannot
transfer or update another operation code image, configuration file, public key,
or HTTPS certificate (i.e., no other concurrent file management operations are
possible).
◆
The upgrade operation code image is set as the startup image after it has been
successfully written to the file system.
◆
The switch will send an SNMP trap and make a log entry upon all upgrade
successes and failures.