LevelOne GEL-1061, Руководство пользователя

Страница: 382 / 500

Chapter 13
| Basic Administration Protocols
Remote Monitoring
– 382 –
Command Usage
◆
Each index number equates to a port on the switch.
◆
If history collection is already enabled on an interface, the entry must be
deleted before any changes can be made.
◆
The information collected for each sample includes:
input octets, packets, broadcast packets, multicast packets, undersize packets,
oversize packets, fragments, jabbers, CRC alignment errors, collisions, drop
events, and network utilization.
For a description of the statistics displayed on the Show Details page, refer to
“Showing Port or Trunk Statistics” on page 100 .
◆
The switch reserves two index entries for each port. If a default index entry is re-
assigned to another port using the Add page, this index will not appear in the
Show nor Show Details page for the port to which is normally assigned. For
example, if control entry 15 is assigned to port 5, this index entry will be
removed from the Show and Show Details page for port 8.
Parameters
These parameters are displayed:
◆
Port – The port number on the switch. (Range: 1-10/28)
◆
Index - Index to this entry. (Range: 1-65535)
◆
Interval - The polling interval. (Range: 1-3600 seconds; Default: 1800 seconds)
◆
Buckets - The number of buckets requested for this entry. (Range: 1-65536;
Default: 8)
The number of buckets granted are displayed on the Show page.
◆
Owner - Name of the person who created this entry. (Range: 1-32 characters)
Web Interface
To periodically sample statistics on a port:
1.
Click Administration, RMON.
2.
Select Configure Interface from the Step list.
3.
Select Add from the Action list.
4.
Click History.
5.
Select a port from the list as the data source.