LevelOne GEL-1061, Руководство пользователя

Страница: 68 / 500

Chapter 3
| Basic Management Tasks
Managing System Files
– 68 –
names is 32 characters for files on the switch or 127 characters for files on the
server. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
Note: Up to two copies of the system software (i.e., the runtime firmware) can be
stored in the file directory on the switch.
Note: The maximum number of user-defined configuration files is limited only by
available flash memory space.
Note: The file “ Factory_Default_Config.cfg ” can be copied to a file server or
management station, but cannot be used as the destination file name on the
switch.
Web Interface
To copy firmware files:
1.
Click System, then File.
2.
Select Copy from the Action list.
3.
Select FTP Upload, HTTP Upload or TFTP Upload as the file transfer method.
4.
If FTP or TFTP Upload is used, enter the IP address of the file server.
5.
If FTP Upload is used, enter the user name and password for your account on
the FTP server.
6.
Set the file type to Operation Code.
7.
Enter the name of the file to download.
8.
Select a file on the switch to overwrite or specify a new file name.
9.
Click Apply.
Figure 8: Copy Firmware