LevelOne GEL-1061 Скачать руководство пользователя страница 151

Страница: 151 / 500

Chapter 5

| VLAN Configuration

Protocol VLANs

– 151 –

■

If the frame is untagged and the protocol type matches, the frame is
forwarded to the appropriate VLAN.

■

If the frame is untagged but the protocol type does not match, the frame is
forwarded to the default VLAN for this interface.

Parameters

These parameters are displayed:

◆

Interface

– Displays a list of ports or trunks.

◆

Port

– Port Identifier. (Range: 1-10/28)

◆

Trunk

– Trunk Identifier. (Range: 1-8)

◆

Protocol Group ID

– Protocol Group ID assigned to the Protocol VLAN Group.

(Range: 1-2147483647)

◆

VLAN ID

– VLAN to which matching protocol traffic is forwarded.

(Range: 1-4094)

◆

Priority

– The priority assigned to untagged ingress traffic.

(Range: 0-7, where 7 is the highest priority)

Web Interface

To map a protocol group to a VLAN for a port or trunk:

Click VLAN, Protocol.

Select Configure Interface from the Step list.

Select Add from the Action list.

Select a port or trunk.

Enter the identifier for a protocol group.

Enter the corresponding VLAN to which the protocol traffic will be forwarded.

Set the priority to assign to untagged ingress frames.

Click Apply.

Содержание GEL-1061





















































































































































































































































































































































































































































































































Результаты поиска

Содержание GEL-1061

Отзывы:

Похожие инструкции для GEL-1061

Бренды по названию

Популярные бренды

LevelOne GEL-1061, Руководство пользователя

Результаты поиска

Содержание GEL-1061

Отзывы:

Похожие инструкции для GEL-1061

Бренды по названию

Популярные бренды