LevelOne FPS-2013TXU, Руководство пользователя

Страница: 52 / 88

Unix
Where:
printer_name is the Print Queue name used to store jobs for the corresponding logical
printer
PS_NAME is the LevelOne Printer Server name defined in /etc/hosts
Logical_Printer_name is the logical printer name on the LevelOne Printer Server
(L1..L3 or L1..L8, depending on your model)
Spooler_directory is the directory you created in Step 6.
Example:
Marketing|RP1_PS123456:\
[T
AB
] :lp=:\
[T
AB
] :rm=PS_Rm203:\
[T
AB
] :rp=L1:\
[T
AB
] :sd=/usr/spool/Marketing:\
[T
AB
] :mx#0:
Repeat this process for each Logical Printer/Print Queue combination that you wish to
create.
LPD on BSD
Before continuing, ensure that an IP Address has been assigned to the LevelOne Printer
Server. Remember the following:
•
The remote host name is the name of the LevelOne Printer Server.
•
The remote printer name is the logical printer (L1..L3, or L1..L8) on the LevelOne
Printer Server.
•
If asked for the LPD type, enter the service type as BSD.
•
In the sample commands shown, printer_name is the Print Queue serviced by the
logical printer on the LevelOne Printer Server, and Spooler_dir is the name of the
directory used to spool the print jobs.
Procedure
Action Sample Command
Create a spooling directory mkdir /usr/spool/ Spooler_dir
Set spooling daemon as owner of
this directory. chown daemon /usr/spool/Spooler_dir
Create read/write permissions. chmod 775 / usr/spool/Spooler_dir
Give permissions to LPD processes. chgrp daemon /usr/spool/Spooler_dir
Add remote printer(s) See below.
Start lpc print mechanism lpc start printer_name
- 49 -