Configuration and diagnostic software Sensor Studio
Leuze electronic
RSL 410
19
Insert the data carrier.
The installation will start automatically.
If installation does not start automatically, double-click the file
SensorStudioSetup.exe
.
If you want to call up the menu of the CD, double-click the file
start.exe
.
Select a language for the interface text in the installation wizard and software and confirm with [OK].
The installation wizard starts.
Click [Next].
The installation wizard opens the software license agreement.
If you want to accept the license agreement, select the appropriate option field and click [Next].
If the suggested installation path is OK, click [Next].
If you want to specify a different path, click the [Browse] button. Select a different path, confirm with [OK]
and click [Next].
Click the [Install] button to start installation
The wizard installs the software and places a shortcut on the desktop (
).
Click the [Finish] button to complete installation.
Installing
LeSafetyCollection
device manager (DTM)
Prerequisites:
• The
Sensor Studio
software is installed on the PC.
• Data carrier inserted.
Double-click the file
LeSafetyCollectionSetup.exe
.
Select a language for the interface text in the installation wizard and software and confirm with [OK].
The installation wizard starts.
Click [Next].
The installation wizard opens the software license agreement.
If you want to accept the license agreement, select the appropriate option field and click [Next].
If the suggested installation path is OK, click [Next].
If you want to specify a different path, click the [Browse] button. Select a different path, confirm with [OK]
and click [Next].
Click the [Install] button to start installation.
The wizard installs the software.
Click the [Finish] button to complete installation.
During installation of the software, a user
admin
(without password query) is created so that you
can start the software without user identification. If other users are registered (Tools > User man
-
agement in the FDT frame menu), you must log in at the software with a user name and pass
-
word.
This setting allows you to connect to the safety sensor and to read out, upload, enter or change
the safety configuration and all settings using the RSL 400 device DTM. The password for the
safety sensor only needs to be entered (i.e. the access level only needs to be changed) when
the changes are downloaded to the safety sensor (see chapter 4.5.1).
