Lenze MSEMA 063-42 Series, Инструкции по монтажу и включению

Страница: 57 / 80

Product extensions
Solid shaft mounting
Depending on the ordered version (with/without flange), different solid shafts are used.
Please pay attention to the order codes marked on the packaging!
You need:
•
Long-nosed pliers for circlip
•
Fitting grease
1
Perform the following activities:
1
.
Remove the protection covers of the hollow shaft bore.
2
.
Apply a thin layer of fitting grease in the area of the contact surfaces of solid shaft and hollow shaft bore.
3
.
Remove the circlip in pos. 1 from the solid shaft.
4
.
Push the solid shaft through the hollow shaft bore up to the limit stop.
5
.
Mount the circlip in pos. 1 of the solid shaft onto the back of the gearbox.
Mechanical installation
Mounting
Product extensions
57