Mounting
Transmission elements
•
Fit or remove transmission elements only using suitable equipment.
•
For fitting the transmission elements use the center hole in the shaft.
•
Avoid impacts and shocks.
•
In case of a belt drive, tension the belt in a controlled manner according to manufacturer information.
•
Be sure to carry out mounting in a manner free from distortion.
•
Compensate minor inaccuracies by suitable flexible couplings.
Fastening
•
Use screws with a minimum property class of 8.8.
•
Observe prescribed starting torques.
•
Secure against unintended loosening.
•
In case of an alternating load, we recommend that you apply an anaerobic curing adhesive between
flange and mounting area.
Gearbox with hollow shaft
•
Use fitting grease in the area of the contact surfaces of machine shaft and hollow shaft bore.
•
Be sure to carry out mounting in a manner free from distortion.
•
Lead forces only across the hollow shaft and not across the housing.
•
For axial fastening, use the snap ring grooves in the hollow shaft.
Fig. 2: Proposed solution for axial fastening
Mechanical installation
Mounting
56
Содержание MSEMA 063-42 Series
Страница 2: ......
Страница 4: ...4...
Страница 18: ...Gewichte Transport Die Transportgewichte entnehmen Sie den Lieferpapieren Mechanische Installation Gewichte 18...