3
CMVPFB01A
Introduction
2
Introduction
The following information is provided to explain how the SMV Series drive operates on a PROFIBUS network;
it is not intended to explain how PROFIBUS itself works. Therefore, a working knowledge of PROFIBUS is
assumed, as well as familiarity with the operation of the SMV Series drive.
2.1 Fieldbus Overview
PROFIBUS-DP Fieldbus is an internationally accepted communications protocol designed for commercial
and industrial installations of factory automation and motion control applications. High data transfer
rates combined with it’s efficient data formatting, permit the coordination and control of multi-node
applications.
2.2 Module Specification
Auto detection of data rates
Supported baudrates: 12Mbps, 6Mbps, 3Mbps, 1.5Mbps, 500kbps, 187.5kbps, 93.75kbps, 45.45kbps,
19.2kbps, 9.6kbps.
Scalable amount of input and output process data words (maximum of 6 in either direction).
Parameter access data channel
2.3 Module Identification Label
Figure 1 illustrates the labels on the SMV PROFIBUS-DP communications module. The SMVector PROFIBUS-
DP module is identifiable by:
Two labels affixed to either side of the module.
The color coded identifier label in the center of the module.
A: Fieldbus Protocol
B: Model Number
C: Lenze Order Number
D: Firmware Revision
E: Hardware Revision
SMV PROFIBUS-DP
TYPE: ESVZAP0
ID-NO: 12345678
ESVZAP0-000XX1A10
A
B
C
D
E
Left-hand Label:
Module Data
Right-hand Label:
Ratings & Certifications
P0
Fieldbus Identifier:
P = PROFIBUS-DP
LISTED
COMM I/O ONLY
S/N: 123456789
Figure 1: PROFIBUS Module Labels
•
•
•
•
•
•