Lenovo ThinkServer TS140 Скачать руководство пользователя | Manualshive

Страница: 124 / 132

background image

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Industry Canada Class A emission compliance statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

United Kingdom telecommunications safety requirement

Notice to Customers

This apparatus is approved under approval number NS/G/1234/J/100003 for indirect connection to public
telecommunication systems in the United Kingdom.

European Union - Compliance to the Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product, including the installation of option cards from other manufacturers.

This product has been tested and found to comply with the limits for Class A Information Technology
Equipment according to European Standard EN 55022. The limits for Class A equipment were derived for
commercial and industrial environments to provide reasonable protection against interference with licensed
communication equipment.

Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia

Warning:

This is a Class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

German Class A compliance statement

Deutschsprachiger EU Hinweis:

Hinweis für Geräte der Klasse A EU-Richtlinie zur Elektromagnetischen Verträglichkeit

Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG (früher 89/336/EWG) zur
Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten
und hält die Grenzwerte der EN 55022 Klasse A ein.

Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu
betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden.
Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt
ohne Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne
Empfehlung der Lenovo gesteckt/eingebaut werden.

Deutschland:

110

ThinkServer TS140 Hardware Maintenance Manual

«
...
122
123
124
125
126
...
»

Содержание ThinkServer TS140





































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer TS140

eserver pSeries 690

Бренд: IBM Страницы: 142

eServer 370 xSeries

Бренд: IBM Страницы: 218

BladeCenter PS703

Бренд: IBM Страницы: 298

BladeCenter T Type 8720

Бренд: IBM Страницы: 180

Бренд: Patton electronics Страницы: 331

Бренд: Xerox Страницы: 24

DocuColor 7000AP

Бренд: Xerox Страницы: 36

Enterprise Server

Бренд: Blackberry Страницы: 88

Бренд: Buffalo Страницы: 80

Бренд: Axel Страницы: 28

Бренд: BlueBroadcaster Страницы: 21

ReadyNAS 3220 Series

Бренд: NETGEAR Страницы: 4

ANR-C62-N1 Series

Бренд: Acrosser Technology Страницы: 57

Бренд: Avaya Страницы: 84

Бренд: Seyeon Страницы: 10

SuperServer 7089P-TR4T

Бренд: Supermicro Страницы: 155

VIP Media Server Pro

Бренд: Chauvet Страницы: 20

Active Fabric Manager

Бренд: Dell Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды