Lenovo ThinkServer TS140 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 132

background image

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the replacement, go to “Completing the parts replacement” on page 90.

• After a system board is replaced, do the following:

1. Start the Setup Utility program by pressing the F1 key, and then check the BIOS version.

2. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to download the

latest version of firmware. Then, install the firmware to your server.

3. Update the machine type, model number, and serial number of the system board. Either you will

be prompted to do this while upgrading the BIOS, or you can locate the files for updating the
VPD within the DOS BIOS package. For some servers, the VPD utility is available for download
at: http://www.lenovo.com/drivers.

Note:

If you want to use the Firmware Updater program, ensure that it is the latest version. To get the

latest version of the Firmware Updater program, go to http://www.lenovo.com/drivers, locate different
versions of the program, and then identify the latest version by comparing readme files. If the latest
version of the Firmware Updater program does not contain the latest version of the driver you need,
download that driver separately from the Web page and install it individually to your server.

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the server cover and
reconnect cables.

To reinstall the server cover and reconnect cables to your server, do the following:

1. Make sure that all components have been reassembled correctly and that no tools or loose screws are

left inside your server. See “Internal components” on page 18 for the locations of various components in
your server.

2. If you have removed the front bezel, reinstall it. See “Removing and reinstalling the front bezel” on

page 42.

3. Make sure that the cables are routed correctly before reinstalling the server cover. Keep cables clear of

the hinges and sides of the server chassis to avoid interference with reinstalling the server cover.

90

ThinkServer TS140 Hardware Maintenance Manual

«
...
102
103
104
105
106
...
»

Содержание ThinkServer TS140





































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer TS140

ShareCenter DNS-343

Бренд: D-Link Страницы: 12

Express5800/T110g-E

Бренд: NEC Страницы: 2

AirborneDirect ABDG-SE-IN5410

Бренд: Quatech Страницы: 8

Бренд: Pathos Acoustics Страницы: 26

VIP Media Server Pro

Бренд: Chauvet Страницы: 20

Бренд: Planet Страницы: 87

Бренд: Skybox Securoty Страницы: 73

Бренд: Cooper Bussmann Страницы: 82

Бренд: TAG Страницы: 44

326m - eServer - 7969

Бренд: IBM Страницы: 82

Бренд: 3onedata Страницы: 4

Бренд: AMX Страницы: 2

Бренд: Altigen Страницы: 462

Бренд: Gateway Страницы: 172

Бренд: Digitus Страницы: 21

Бренд: Dell EMC Страницы: 48

Бренд: Melco Страницы: 56

Бренд: IBM Страницы: 164

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды