36
Table 2. Energy Saving
Set Points
NOTE - Humidification and dehumidifica
tion are not part of the energy savings pro
gram. A higher utility bill may occur when
not using the setpoints in this table.
Time
Heating
Cooling
Wake
70°F (21°C)
78°F (25°C)
Leave
62°F (17°C)
85°F (29°C)
Return
70°F (21C)
78°F (25°C)
Sleep
62°F (17°C)
82°F (28°C)
ENERGY SAVING DEFAULT
Energy saving recommended set points for
heating and cooling can help save energy. The
time and temperatures reference in table 2 are
pre-programmed into the thermostat to achieve
energy savings.
Scroll to ENERGY SAVING DEFAULT; touch to
select. Read the message on the screen and to
continue, touch
CONFIRM
.
SYSTEM TEST MODES
After the thermostat has been installed and set-up,
the installer may run a system test function
(accessed through the installer settings menu), to
test all cooling, heating, emergency heating
stages and FAN outputs.
Select system test mode. A pop-up will be
displayed indicating all equipment will be stopped.
Touch
confirm
to continue.
Pressing the
OFF
button next to the desired option
will change the status to
ON
and will enable the
relay for that terminal. Pressing again will turn
OFF
the relay. Touch the left arrow (<) to exit the system
test mode.
Содержание ComfortSense 7500
Страница 12: ...12 Figure 3 Enhanced Dehumidification Accessory Typical Wiring Diagram ...
Страница 13: ...13 Tc To To Tc Figure 4 CBX32MV XXX 230 06 or Higher and CBX40UHV Wiring Diagrams Condensing Unit Applications ...
Страница 14: ...14 To Tc To Tc Figure 5 CBX32MV XXX 230 06 or Higher and CBX40UHV Wiring Diagrams Heat Pump Unit Applications ...
Страница 18: ...18 TSTAT EL280P TSTAT EL296E EL296V SL280V To Tc To Tc Figure 9 Thermostat Wiring Diagrams continued ...
