Lennox BAC 024 SNM 3M, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 102

• 12 •
BALTIC-IOM-0412-E / Installation manual
DELIVERY CHECKS
Rating plate
The rating plate provides a complete reference for the model and ensures that the
unit corresponds to the model ordered. It states the electrical power consumption
of the unit on start-up, its rated power and its supply voltage. The supply voltage
must not deviate 10/-15 %. The start-up power is the maximum value
likely to be achieved for the speci
fi ed operational voltage. The customer must
have a suitable electrical supply. It is therefore important to check whether the
supply voltage stated on the unit's rating plate is compatible with that of the mains
electrical supply. The rating plate also states the year of manufacture as well as
the type of refrigerant used and the required charge for each compressor circuit.
Storage
When units are delivered on site they are not always required immediately and are sometimes put into storage. In the event of medium
to long-term storage, we recommend the following procedures:
• Ensure that there is no water in the hydraulic systems.
• Keep the heat exchanger covers in position.
• Keep protective plastic
fi lm in position.
• Ensure the electrical panels are closed.
• Keep all items and options supplied in a dry and clean place for future assembly before using the equipment.
Maintenance key
On delivery we recommend that you keep the key which is attached to an eyebolt in a safe and accessible
place. This allows you to open the panels for maintenance and installation work.
The locks are ¼ turn + then tighter.
On receipt of new equipment please check the following points.
It is the customer’s responsibility to ensure that the products are in good working order:
• The exterior has not been damaged in any way.
• The lifting and handling equipment are suitable for the equipment and comply with the speci
fi cations of the handling instructions
enclosed here-in.
• Accessories ordered for on site installation have been delivered and are in good working order.
• The equipment supplied corresponds to the order and matches the delivery note.
If the product is damaged, exact details must be con fi rmed in writing by registered post to the shipping company within 48 hours of
delivery (working days). A copy of the letter must be addressed to LENNOX and the supplier or distributor for information purposes.
Failure to comply will invalidate any claim against the shipping company.